Concentric Casing System

MEGABIT Concentric Casing System Ring Bit is the latest new and simple product line designed and manufactured by OCMA DrillTech for drilling through overburden with casing.
The MEGABIT Ring Bit System an be used in all ground conditions and drilling applications as: Foundation construction, Piling construction, Water Well and Geothermal, Tunneling and Horizontal drilling.

MEGABIT Advantages

• Straight Holes and Fast Penetration Rate
• Less Torque in all ground conditions
• Easy System to lock and Unlock Ring
• Drilling at any angle required
• More Holes and Low investment

MEGABIT VS Competitors Systems

The advantage of MEGABIT Casing System compared with the competitors models is that the percussion Energy zone transmitted by the Pilot Bit to the Ring Bit is close to the ground and located near the buttom of the Ring Bit. This guarantees more Impact Energy on the Ring Bit for more penetration rate.

Download Catalogue

Lock Position

Unlock Position

Single Use Ring is for permanent casing drilling applications. Used for soft ground and short drilling length.

REQUIRE YOUR MEGABIT RING BIT SYSTEM

CASING Outside Diam. - mm

CASING Wall Thickness - mm

DTH HAMMER Size (Inch")

BIT SHANK Type

MEGABIT Model

RING BIT Type

QUANTITY

COMPANY NAME

COUNTRY

EMAIL Address

The Standard is designed as Rubust and Heavy Duty Ring Bit. Used for longer drilling length and permanent drilling applications.

The Multi Use Ring is used several times due to stronger composition for deep drilling length where the casing pipe is to be collected (Temporary Casing).

Single Use Ring is for permanent casing drilling applications. Used for soft ground and short drilling length.

Single Use Ring is for permanent casing drilling applications. Used for soft ground and short drilling length.